Burr Lake Part 2

There are so many pics...We do the same thing every year...so I decided to break it up into two posts


These rides are at the Pizza House.  We ride it every year....that is Jack

Nick

Mckenna and Brooke

Nick

Nick

Nick

Brooke asleep

My new swim shoes

Brooke and McKenna

Brooke

Brooke and Abi

.

Pic at Zipz where we got a shake every night

Water heater and Air Conditioner

What could be more boring than a post titled water heater and air conditioning?  Well, they are super boring unless they go out.  We got home from Bear Lake to a leaking water heater (which now that I think about it , it has been leaking for a while) and a broken air conditioner.  One things Hot water is a priority, but that is before the air goes out and it is 100 degrees outside.

William  went to Home Depot and bought a Water heater and actually installed it himself.  We are getting pretty good after the ice maker install...Anyway, the old one was super heavy.  I couldn't even help lift it.  But it is out and he figured out how to install the new one. Viola!  Hot water again.
It was going to be over 8 days to hire someone to install it.  Yahoo.

This is the old water heater that leaked.  It was super heavy and could have been soo much worse.  Not much got on the new carpet.   New water heater installed.  Such a beautiful site!

Then amongst the water heater install, it seemed the house was getting hotter and hotter.  We had been home about 24 hours...Sure enough it got to 94 degrees in the house Saturday Night.  I had to start getting ready for 11:00 church around 7:30 am because I had to iron and shower before I started sweating...serious.  Then on the drive to church I had to sit in the car about 10 minutes before I walked in so I could dry off.

This is me sweating on my way to get the part....it was soo hot

I emailed HVAC and called them to see if they came out on Sunday or Holidays.  The next day was July 24.  She emailed me back that they could come in the am if I could wait that long.  But did we check the filter, is the air blowing outside, is it icing up?  So, William checked those things and sure enough, the outside blower wasn't on.  Youtube the problem, and everything pointed to a Capaciter

being out.  


Capaciters are not that expensive, but they have to be shipped to you....4 days minimum at the Home Depot...called around on July 24 (holiday in Utah)  and found a store open that would sell it to Home owners.  $42.00.  Ok, I ran to pick it up.  Get there, and I know the guy working there from RSL hot dogs.  I got the part for $15.00!  even better.  So, the air conditioner is fixed for $15.00.  Much cheaper than the service call from HVAC.   But they were the ones that helped fix it anyway.  Yea for cold air.

This is me during church in  nice air conditioned primary room!

Refinishing my Table Project

So I have this Kitchen table.  I inherited it and I don't like it very much.  I thought about just buying a new one, but I don't have any money, and this one is really a good quality table. I just don't like it.  So I decided to refinish it.  I didn't have anything to lose because It wasn't my favorite anyway.  So, here is the before pics.  I forgot to take them before I hauled it to the garage.  But it is this orange oak look.  Don't mind the messy garage.

Fg

So I started reading how to refinish a table.  There is plenty of resourses out there.  I decided to Strip the old finish off.  I used some citristrip to do that. It sat for about 7 hours to let it do its thing.  Then I scraped all the finish off.  It is super cool to strip this gross black stuff and see what is below.  Some people recommended to just sand the finish off.  But I kindof liked the stripper idea because then my sanding was less.  

So after stripping, I had to wipe it down with Mineral Spirits.  This step was also only suggested by some.  But it got off the excess stripper and finish.  Because if you have excess old finish, the new stain won't look right.  

Then I used Wood Conditioner.  This was only used by a few websites too.  But I think it made the wood look much better.  

 Finally it is time to Stain. I used this Dark Walnut stain from Minwax.  Here is the table with the stain on.  I wiped it off and here was the result.  I decided to make it darker because most recommended two coats.  So I added another coat.  Then another for good measure.  Because then I was out of stain and that had to be the color.

 This is the color after the stain. I absolutely love it.

I also used some protective layer on the top of the stain so it would hold up to all the wear and tear.  That's why the top is shiny in the below pictures.  That was three coats of painting it on and drying.  

Now onto the base.  There was a million suggestions for what to do.  Most people just painted the base white.  Some used Chalk Paint which is expensive and others didn't.  I decided to just use  Behr paint with primer.  If you buy it over July 4, you get a $10.00 mail in rebate.  All over that.  So, I washed it really well (probably the first time since we have had it)  and sanded it so the paint would stick.  I had to paint it a bunch of times because the stain would bleed through.  I didn't have that trouble on the top because I took off the stain.  Most of the suggestions were to use primer.  So I just used more of my primer paint.  I think finally I got all the spots covered.

.

 That is the final product for the table.  The pics are not very good because I realized I didn't have an after pic.  Here it is.  I really am proud of myself.  I can't believe I actually did that.